LOGIN  |  REGISTER
Smart Living Made Brilliant!
CASTLEOS FORUM

HomeGeneral Support

The general support forum topic for CastleOS - ask questions, get help, and more

Insteon Hub 2422-222 won't connect to castlehub Messages in this topic - RSS

Wayne Luick
Wayne Luick
Posts: 1


12/28/2016
Wayne Luick
Wayne Luick
Posts: 1
Hello - I began setting up my castlehub per the directions. I then attempted to enable the insteon hub. The directions state to enter the IP of the Insteon hub and click "save" to load the PLM ID. When I do so, the only feedback is that the PLM ID is not loaded. I have verified access to the Insteon Hub at that IP address. Insteon functionality is listed as on the settings page. I have also attempted to Enable insteon functionality to no avail. Thoughts?

-wluick
0 link
Chris Cicchitelli
Chris Cicchitelli
Administrator
Posts: 3390


12/28/2016
Chris Cicchitelli
Chris Cicchitelli
Administrator
Posts: 3390
Hi Wayne, it is possible there is something else currently connected to the INSTEON hub? It only allows one incoming connection, so if something else was using it it would block CastleOS.
0 link